VS Coating, Titanium Alloy Spiral Tap (Unified Screw, Fine Type), Small Diameter Type
VS Coating, Titanium Alloy Spiral Tap (Unified Screw, Fine Type), Small Diameter Type
Chamfer threads (Lcf) | 2.5P | Tool Material Type | Powder high-speed steel | Tap Type | Spiral Tap |
---|---|---|---|---|---|
Hole type | For through hole | Coating Y/N | Available | Coating Type | Other |
Артикул: 148004 148012 148016 148023 Категории: Режущие инструменты, Спиральные метчики
Похожие товары
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
GT Middle Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiN | Package vertical(mm) | 130 |
Package horizontal(mm) | 105 | Package height(mm) | 12 | Shaft diameter(mm) | 6.35 |
Flute length(mm) | 40 | Drill bit hardness | HRC 58 to 63° | Drillable plate thickness | (Approx.) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 |
JAN code | 4904781381210 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |