Turning Insert Diamond 80°, Negative, with Hole, CNMG1200TN-V «for Intermediate Cutting»
Turning Insert Diamond 80°, Negative, with Hole, CNMG1200TN-V «for Intermediate Cutting»
Shape | C (80° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
---|---|---|---|---|---|
work material | Steel / Stainless Steel / Cast Iron | Breaker Use | Medium grinding | Rake angle | Negative |
Cutting Direction | No-hand | Nose R | 0.8 | r? | 0.8 |
Material | TN60 |
This page is Turning Insert Diamond 80°, Negative, with Hole, CNMG1200TN-V «for Intermediate Cutting», part number CNMG120408TN-V-TN60.
You can find the detail information about specifications and dimensions on part number CNMG120408TN-V-TN60.
Артикул: CNMG120408TN-V-TN60 Категории: Поворотные вставки, Режущие инструменты
Похожие товары
Standard Solid Drill with Coating
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
GT Short Drill Set
work material | Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 130 | Package horizontal(mm) | 80 |
Package height(mm) | 12 | Shaft diameter(mm) | 6.35 | Drill bit hardness | HRC 58 to 63° |
JAN code | 4904781381234 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |