Tip for Turning Triangle Shape / Negative / with Hole TNMGL-SG
Tip for Turning Triangle Shape / Negative / with Hole TNMGL-SG
Shape | T (Triangle) | Application | Outer Diameter/Inner Diameter | Available corners | 3 |
---|---|---|---|---|---|
work material | Stainless Steel | Rake angle | Negative | Cutting Direction | Left-hand |
Nose R | 0.4 | Material type | JC8015 |
This page is Tip for Turning Triangle Shape / Negative / with Hole TNMGL-SG, part number TNMG160404L-SG-JC8015.
You can find the detail information about specifications and dimensions on part number TNMG160404L-SG-JC8015.
Артикул: TNMG160404L-SG-JC8015 Категории: Поворотные вставки, Режущие инструменты
Похожие товары
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-03
Package vertical(mm) | 185 | Package horizontal(mm) | 80 | Package height(mm) | 20 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387052 |