Tip for Lathe, CBN Diamond, Positive SPGN
Tip for Lathe, CBN Diamond, Positive SPGN
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 1 |
---|---|---|---|---|---|
work material | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Rake angle | Pozidriv | Cutting Direction | No-hand |
Nose R | 0.4 | r? | 0.4 | Material | KPD010 |
This page is Tip for Lathe, CBN Diamond, Positive SPGN, part number SPGN120304-KPD010.
You can find the detail information about specifications and dimensions on part number SPGN120304-KPD010.
Артикул: SPGN120304-KPD010 Категории: Поворотные вставки, Режущие инструменты
Похожие товары
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
GT Drill Set For Ironworking, GTHDS-19
work material | general steel / Aluminum / Resin | Package vertical(mm) | 210 | Package horizontal(mm) | 175 |
---|---|---|---|---|---|
Package height(mm) | 35 | JAN code | 4904781381746 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |