TiN Point Tap PRC-PO-G
TiN Point Tap PRC-PO-G
Chamfer threads (Lcf) | 5 | Tool Material Type | Vanadium High-Speed Steel | work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Stainless steel (SUS) / Aluminum Alloy Casting (AC, ADC) |
---|---|---|---|---|---|
Tap Type | Point tap | Hole type | For through hole | Coating Y/N | Available |
Coating Type | TiN |
Артикул: PRC-PO24G PRC-PO35G PRC-PO47G PRC-PO58G PRC-PO61G PRC-PO1015G PRC-PO12175G PRC-PO142G PRC-PO162G PRC-PO2545G PRC-PO2645G PRC-PO8125G Категории: Режущие инструменты, Точечные метчики
Похожие товары
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
GT Short Drill Set
work material | Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 130 | Package horizontal(mm) | 80 |
Package height(mm) | 12 | Shaft diameter(mm) | 6.35 | Drill bit hardness | HRC 58 to 63° |
JAN code | 4904781381234 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |