Taper Tap Series for American Pipes TIN Coated Interrupted Threads TIN-IRT
Taper Tap Series for American Pipes TIN Coated Interrupted Threads TIN-IRT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Carbide |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Stainless steel (SUS) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | ANSI G |
Number of Grooves | 5 |
Артикул: TIN-IRT-A-NPT-1/2-14 TIN-IRT-A-NPT-1/4-18 TIN-IRT-A-NPT-1/8-27 TIN-IRT-A-NPT-1-11-1/2 TIN-IRT-A-NPT-3/4-14 TIN-IRT-A-NPT-3/8-18 Категории: Taps for Pipes, Режущие инструменты
Похожие товары
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-03
Package vertical(mm) | 185 | Package horizontal(mm) | 80 | Package height(mm) | 20 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387052 |