Standard Insert, 80° Diamond-Shape, Negative, CNMG-WV
Standard Insert, 80° Diamond-Shape, Negative, CNMG-WV
Shape | C (80° Diamond-Shape) | work material | Steel / Cast Iron / Non-ferrous metal | Rake angle | Negative |
---|---|---|---|---|---|
Nose R | 0.8 | Material type | C7Z | Material classification | PVD cermet |
Inscribed circle (IC)(mm) | 12.7 | Thickness (T)(mm) | 4.76 |
This page is Standard Insert, 80° Diamond-Shape, Negative, CNMG-WV, part number CNMG120408ENWV-C7Z.
You can find the detail information about specifications and dimensions on part number CNMG120408ENWV-C7Z.
Артикул: CNMG120408ENWV-C7Z Категории: Поворотные вставки, Режущие инструменты
Похожие товары
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |
GT Drill Set For Woodwork, WDS-03
Package vertical(mm) | 185 | Package horizontal(mm) | 80 | Package height(mm) | 20 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387052 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
GT Middle Cobalt Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | Cobalt HSS | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 100 | Package height(mm) | 12 |
Shaft diameter(mm) | 6.35 | Flute length(mm) | 40 | Drill bit hardness | HRC 63 to 66° |
Drillable plate thickness | (Guide) (Drill bit size: stainless steel) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 | JAN code | 4904781381227 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |