Spiral Tap for left screws SP (LH)(N-SP(LH))
Spiral Tap for left screws SP (LH)(N-SP(LH))
Screw Types | Meter | Chamfer threads | 2.5P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Quenched and tempered steel (25 to 35 HRC) / Steel casting (SC) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Spiral Tap | Hole type | For blind hole |
Coating Y/N | NA | Number of Grooves | 3 | Shape | c |
Артикул: SNP3.0G-L SPQ6.0M-L Категории: Режущие инструменты, Спиральные метчики
Похожие товары
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
GT Drill Set For Stainless Steel
work material | general steel / Stainless Steel / Aluminum / Titanium | Tool Material Type | Cobalt HSS | Package vertical(mm) | 180 |
---|---|---|---|---|---|
Package horizontal(mm) | 110 | Package height(mm) | 20 | Shape | Machined with X-type thinning (3.0 mm or more) |
Shank | Hex shank | Shaft diameter(mm) | 6.35 | JAN code | 4904781384242 |
GT Middle Cobalt Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | Cobalt HSS | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 100 | Package height(mm) | 12 |
Shaft diameter(mm) | 6.35 | Flute length(mm) | 40 | Drill bit hardness | HRC 63 to 66° |
Drillable plate thickness | (Guide) (Drill bit size: stainless steel) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 | JAN code | 4904781381227 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |