Small Diameter Spiral Tap for Nickel Alloy (Unified Thread, Fine Type), Small Diameter Type
Small Diameter Spiral Tap for Nickel Alloy (Unified Thread, Fine Type), Small Diameter Type
Chamfer threads (Lcf) | 2.5P | Tool Material Type | Powder high-speed steel | Tap Type | Spiral Tap |
---|---|---|---|---|---|
Hole type | For blind hole | Coating Y/N | NA |
Артикул: 149015 149138 149235 149282 149344 Категории: Режущие инструменты, Спиральные метчики
Похожие товары
GT Middle Cobalt Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | Cobalt HSS | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 100 | Package height(mm) | 12 |
Shaft diameter(mm) | 6.35 | Flute length(mm) | 40 | Drill bit hardness | HRC 63 to 66° |
Drillable plate thickness | (Guide) (Drill bit size: stainless steel) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 | JAN code | 4904781381227 |
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |
Micro Drill «NEO PRO» Short Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Overall Length L(mm) | 38 |
---|---|---|---|---|---|
Shank Type | Pivot Type | Coating Y/N | Available | Coating Type | FCS |
With/without Oil Hole | NA | shank d(mm) | 3 | Torsion(°) | 30 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |