Small Bore Threaded, EZ Bar, EZT Model
Small Bore Threaded, EZ Bar, EZT Model
Cutting Direction | Right-hand | r? | 0.02±0.01 | Material | PR1225 |
---|---|---|---|---|---|
?d(mm) | 2.5 | ?A | 3.0 | F(mm) | 1.19 |
H(mm) | 2.3 | S(mm) | 1.0 | L1(mm) | 35.0 |
L2(mm) | 6.5 | L3(mm) | 5.4 | d(mm) | 0.5 |
?(mm) | 60° | Metric Thread (Nominal Thread) | M4 or more (Detail M3.5 or more) | Metric Thread (Pitch mm) | P0.5 ~P0.8 |
Unified Screw (Nominal Thread) | No.8-32UNC, No.8-36UNF or more | Unified Screw (Pitch (Threads/Inch)) | 36 ~ 32 |
This page is Small Bore Threaded, EZ Bar, EZT Model, part number EZTR030025-60-002-PR1225.
You can find the detail information about specifications and dimensions on part number EZTR030025-60-002-PR1225.
Артикул: EZTR030025-60-002-PR1225 Категории: Thread Cutting Holders, Режущие инструменты
Похожие товары
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
GT Middle Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiN | Package vertical(mm) | 130 |
Package horizontal(mm) | 105 | Package height(mm) | 12 | Shaft diameter(mm) | 6.35 |
Flute length(mm) | 40 | Drill bit hardness | HRC 58 to 63° | Drillable plate thickness | (Approx.) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 |
JAN code | 4904781381210 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Short Drill Set
work material | Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 130 | Package horizontal(mm) | 80 |
Package height(mm) | 12 | Shaft diameter(mm) | 6.35 | Drill bit hardness | HRC 58 to 63° |
JAN code | 4904781381234 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |