SG Synchro Tap (with Oil Hole) SGSSP
SG Synchro Tap (with Oil Hole) SGSSP
Screw Types | Meter | Chamfer threads | 2.5 | Tool Material Type | Alloy HSS |
---|---|---|---|---|---|
work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Quenched and tempered steel (25 to 35 HRC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Copper (Cu) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) | Tap Type | Spiral Tap | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Number of Grooves Flutes | 3 | Surface Treatment | SG (TiCN-based) Coat |
Артикул: SGSSP3M0.5R SGSSP4M0.7R SGSSP5M0.8R SGSSP6M0.75R SGSSP6M1R SGSSP8M1R SGSSP8M1.25R SGSSP10M1.5R SGSSP10M1.25R SGSSP12M1.5R SGSSP12M1.25R SGSSP12M1.75R Категории: Режущие инструменты, Спиральные метчики
Похожие товары
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 190 | Package horizontal(mm) | 108 |
Package height(mm) | 16 | JAN code | 4904781381739 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
GT Short Drill Set
work material | Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 130 | Package horizontal(mm) | 80 |
Package height(mm) | 12 | Shaft diameter(mm) | 6.35 | Drill bit hardness | HRC 58 to 63° |
JAN code | 4904781381234 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |