Sandvik CoroCut 2 Plunging/Grooving Tip 2135
Sandvik CoroCut 2 Plunging/Grooving Tip 2135
Cutting Direction | No-hand | Specifications | For Groove Machining, Low Feed Machining, Sheet Size: E, Width 2.0 mm, Full R | Trusco Code | 609-8215 |
---|---|---|---|---|---|
Quantity | 10 |
This page is Sandvik CoroCut 2 Plunging/Grooving Tip 2135, part number N123E2-0200-R0-2135.
You can find the detail information about specifications and dimensions on part number N123E2-0200-R0-2135.
Артикул: N123E2-0200-R0-2135 Категории: Поворотные вставки, Режущие инструменты
Похожие товары
Standard Solid Drill with Coating
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |