PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)
PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)
Applicable Tip Shape | T (Triangle) | Application | Outer Diameter | Clamp Shape | Lever lock |
---|---|---|---|---|---|
Cutting Direction | Right-hand | Applicable Tip Clearance Angle Type | Negative | B(mm) | 20 |
F1(mm) | 20 | H1=h(mm) | 16 | S(mm) | 0 |
L1(mm) | 120 | L2(mm) | 24 | Sheet | LT-32N?LT-32N-20 |
Wrench | FH-2.5 | Lever | LL-1N | Lock screw | LS-1N |
Shim Pin | LSP-1 | Punch | PC-1 | Standard corner R (r?) | 0.8 |
This page is PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining), part number PTLNR1620JX-16FF.
You can find the detail information about specifications and dimensions on part number PTLNR1620JX-16FF.
Артикул: PTLNR1620JX-16FF Категории: Holding Tools for O.D. Tuning, Режущие инструменты
Похожие товары
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
GT Middle Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiN | Package vertical(mm) | 130 |
Package horizontal(mm) | 105 | Package height(mm) | 12 | Shaft diameter(mm) | 6.35 |
Flute length(mm) | 40 | Drill bit hardness | HRC 58 to 63° | Drillable plate thickness | (Approx.) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 |
JAN code | 4904781381210 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Middle Cobalt Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | Cobalt HSS | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 100 | Package height(mm) | 12 |
Shaft diameter(mm) | 6.35 | Flute length(mm) | 40 | Drill bit hardness | HRC 63 to 66° |
Drillable plate thickness | (Guide) (Drill bit size: stainless steel) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 | JAN code | 4904781381227 |
Micro Drill «NEO PRO» Short Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Overall Length L(mm) | 38 |
---|---|---|---|---|---|
Shank Type | Pivot Type | Coating Y/N | Available | Coating Type | FCS |
With/without Oil Hole | NA | shank d(mm) | 3 | Torsion(°) | 30 |