PDHN Type (External Diameter, End Face, Profiling)
PDHN Type (External Diameter, End Face, Profiling)
Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / End Face / Profiling | Clamp Shape | Lever lock |
---|---|---|---|---|---|
Applicable Tip Clearance Angle Type | Negative | L2(mm) | 36 | Sheet | ?LD-43?LD-43-20(LD-42)(?LD-42-20) |
Wrench | LW-3 | Lever | LL-4 | Lock screw | LS-3 |
Shim Pin | LSP-2 | Punch | PC-2 | Standard corner R (r?) | 0.8 |
Артикул: PDHNL2020K-15 PDHNL2525M-15 PDHNR2020K-15 PDHNR2525M-15 Категории: Holding Tools for O.D. Tuning, Режущие инструменты
Похожие товары
GT Drill Set For Stainless Steel
work material | general steel / Stainless Steel / Aluminum / Titanium | Tool Material Type | Cobalt HSS | Package vertical(mm) | 180 |
---|---|---|---|---|---|
Package horizontal(mm) | 110 | Package height(mm) | 20 | Shape | Machined with X-type thinning (3.0 mm or more) |
Shank | Hex shank | Shaft diameter(mm) | 6.35 | JAN code | 4904781384242 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
GT Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 190 | Package horizontal(mm) | 108 |
Package height(mm) | 16 | JAN code | 4904781381739 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-03
Package vertical(mm) | 185 | Package horizontal(mm) | 80 | Package height(mm) | 20 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387052 |
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |