Outer-Diameter Turning — Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDHNR/L
Outer-Diameter Turning — Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDHNR/L
Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / Profiling / Chamfer | Clamp Shape | Cable clamp |
---|---|---|---|---|---|
Cutting Direction | Left-hand | Applicable Tip Clearance Angle Type | Negative | Shank height(mm) | 32 |
Shank width(mm) | 32 | Rake angle(°) | -6 | Blade Inclination Angle(°) | -7 |
Lead Angle(°) | -17.5 | Specifications | Tip thickness for 4.76 mm (3/16 inch) | Cutting Angle(°) | 107.5 |
Clearance angle(°) | 0 | Function Width(mm) | 32 | Function Height(mm) | 32 |
Function Length(mm) | 170 | Dimension L3(mm) | 36.1 | Tip Size | 15 |
Gauge Chip | DNMG 15 04 08 | Torque(Nm) | 3.9 |
This page is Outer-Diameter Turning — Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDHNR/L, part number DDHNL3225P1504.
You can find the detail information about specifications and dimensions on part number DDHNL3225P1504.
Артикул: DDHNL3225P1504 Категории: Holding Tools for O.D. Tuning, Режущие инструменты
Похожие товары
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Micro Drill «NEO PRO» Short Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Overall Length L(mm) | 38 |
---|---|---|---|---|---|
Shank Type | Pivot Type | Coating Y/N | Available | Coating Type | FCS |
With/without Oil Hole | NA | shank d(mm) | 3 | Torsion(°) | 30 |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |