Outer Diameter Turning, Bit For Negative Inserts (T-MAX P), PDJN Type, Diamond Shape 55° Insert Compatible
Outer Diameter Turning, Bit For Negative Inserts (T-MAX P), PDJN Type, Diamond Shape 55° Insert Compatible
Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / Profiling / Chamfer | Clamp Shape | Lever lock |
---|---|---|---|---|---|
Cutting Direction | Left-hand | Applicable Tip Clearance Angle Type | Negative | Rake angle(°) | -6 |
Blade Inclination Angle(°) | -7 | Lead Angle(°) | -3 | Cutting Angle(°) | 93 |
Clearance angle(°) | 0 | Function Width(mm) | 35 | Function Length(mm) | 60 |
Nose r?(mm) | 0.8 | Applicable Chip | DN??15 04 |
This page is Outer Diameter Turning, Bit For Negative Inserts (T-MAX P), PDJN Type, Diamond Shape 55° Insert Compatible, part number C5-PDJNL-35060-15-S04.
You can find the detail information about specifications and dimensions on part number C5-PDJNL-35060-15-S04.
Артикул: C5-PDJNL-35060-15-S04 Категории: Holding Tools for O.D. Tuning, Режущие инструменты
Похожие товары
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |