Micro Drill, Type-N 706
Micro Drill, Type-N 706
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Overall Length L1(mm) | 38 |
---|---|---|---|---|---|
Coating Y/N | NA | With/without Oil Hole | NA | Number of flutes(sheet) | 2 |
tip angle(°) | 130 |
Артикул: 0706-000.500 0706-000.600 0706-000.650 0706-000.700 0706-000.750 0706-000.800 0706-000.850 0706-000.900 0706-001.000 0706-001.050 0706-001.100 0706-001.400 0706-001.450 Категории: Режущие инструменты, Твердосплавные сверла
Похожие товары
Standard Solid Drill with Coating
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
Torsion(°) | 30 |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |