Inner R Cutter DIR for Copper Electrode, Aluminum and Plastic
Inner R Cutter DIR for Copper Electrode, Aluminum and Plastic
Application | Round Chamfer | Work material | Aluminum / Copper / Resin | Single blade, two blades | Single blade |
---|---|---|---|---|---|
Peripheral Blade Y/N | NA | Tool Material Type | Carbide | Coating Y/N | NA |
Артикул: DIR-R0.1 DIR-R0.2 DIR-R0.3 DIR-R0.4 DIR-R0.5 DIR-R0.6 DIR-R0.7 DIR-R0.8 DIR-R0.9 DIR-R0.15 DIR-R0.25 DIR-R0.35 DIR-R0.45 DIR-R0.55 DIR-R0.65 DIR-R0.75 DIR-R0.85 DIR-R0.95 DIR-R1 DIR-R1.5 DIR-R1.25 DIR-R1.75 DIR-R2 DIR-R2.5 DIR-R3 DIR-R3.5 DIR-R4 DIR-R4.5 DIR-R5 Категории: Inner R, Режущие инструменты
Похожие товары
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
Micro Drill «NEO PRO» Short Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Overall Length L(mm) | 38 |
---|---|---|---|---|---|
Shank Type | Pivot Type | Coating Y/N | Available | Coating Type | FCS |
With/without Oil Hole | NA | shank d(mm) | 3 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 90° D922X
Work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |