Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT
Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT
Screw Types | Meter | Chamfer threads | 8P | Tool Material Type | Vanadium high-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) | Tap Type | Roll tap | Hole type | For through hole |
Coating Y/N | Available | Coating Type | TiCN |
Артикул: V-SS-NRT-M1.4X0.3 V-SS-NRT-M1.7X0.35 V-SS-NRT-M2X0.4 V-SS-NRT-M2.3X0.4 V-SS-NRT-M2.5X0.45 V-SS-NRT-M2.6X0.45 V-SS-NRT-M3X0.5 V-SS-NRT-M3.5X0.6 V-SS-NRT-M4X0.7 V-SS-NRT-M5X0.8 V-SS-NRT-M6X1 Категории: Отводы, Режущие инструменты
Похожие товары
GT Middle Cobalt Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | Cobalt HSS | Overall Length L(mm) | 80 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 100 | Package height(mm) | 12 |
Shaft diameter(mm) | 6.35 | Flute length(mm) | 40 | Drill bit hardness | HRC 63 to 66° |
Drillable plate thickness | (Guide) (Drill bit size: stainless steel) / 2.0: 4.0, 2.5: 5.0, 2.8: 5.5, 3.0: 6.0, 3.2: 6.5, 3.5: 7.0, 3.8: 7.5, 4.0: 8.0, 4.5: 9.0, 5.0: 10.0 | JAN code | 4904781381227 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
Super Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Standard Solid Drill with Coating
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 90° Long AlTiN D932X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 90 |