For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT
For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT
Screw Types | Taper for Pipe | Chamfer threads | 3P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Stainless steel (SUS) / Steel casting (SC) | Tap Type | Tap for pipes | Hole type | For through hole |
Coating Y/N | NA | Class | ? | Shape | h |
Артикул: TINT02K TINT04 TINT06 TINT08Q TINT12Q TINT16U TINT20U TINT24U Категории: Taps for Pipes, Режущие инструменты
Похожие товары
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |
GT Hex Shank Pilot Hole Drill
work material | Aluminum | Coating Y/N | Available | Coating Type | TiAlN |
---|---|---|---|---|---|
Package vertical(mm) | 167 | Package height(mm) | 20 | Shape | Tapered |
Shank | Hex shank | Shaft diameter(mm) | 6.35 |
GT Drill Set For Woodwork, WDS-8?8 Pieces Per Package?
Length(mm) | 135 | Height(mm) | 16 | Width(mm) | 90 |
---|---|---|---|---|---|
Package vertical(mm) | 160 | Package horizontal(mm) | 95 | Package height(mm) | 16 |
Shank | Round shaft | JAN code | 4904781390694 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
Standard Solid Drill with Coating
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | TiAlN | With/without Oil Hole | NA |
Torsion(°) | 30 |