For Graphite, 2 Flutes, Long Type, GF-EDL
For Graphite, 2 Flutes, Long Type, GF-EDL
work material | Graphite | Number of flutes(sheet) | 2 | Type | Square |
---|---|---|---|---|---|
Coating | Non-Coated | Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Blade tip shape | With Lead |
Torsion Angle (?) | Standard torsion (30-40°) |
Артикул: GF-EDL-2 GF-EDL-3 GF-EDL-4 GF-EDL-5 GF-EDL-6 GF-EDL-7 GF-EDL-8 GF-EDL-9 GF-EDL-10 GF-EDL-11 GF-EDL-12 Категории: Концевые фрезы из карбида, Режущие инструменты
Похожие товары
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Micro Drill, for Stainless Steel
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 140 | Torsion(°) | 26~32 |
GT Drill Set For Ironworking, GTNDR-10
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Package vertical(mm) | 190 |
---|---|---|---|---|---|
Package horizontal(mm) | 108 | Package height(mm) | 16 | JAN code | 4904781381722 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |