For Graphite, 2 Flutes, Ball End Type, GF-EBDR
For Graphite, 2 Flutes, Ball End Type, GF-EBDR
Type | Ball | work material | Graphite | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | Non-Coated | Machining Application | Curved surface / Side / Engraving / R Groove |
Артикул: GF-EBDR-R1X2 GF-EBDR-R1.5X3 GF-EBDR-R2X4 GF-EBDR-R2.5X5 GF-EBDR-R3X6 GF-EBDR-R3.5X7 GF-EBDR-R4X8 GF-EBDR-R4.5X9 GF-EBDR-R5X10 GF-EBDR-R5.5X11 GF-EBDR-R6X12 Категории: Режущие инструменты, Твердосплавные концевые фрезы
Похожие товары
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |
Carbide 2-Flute Leading Drill 120° D923X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 120 |
GT Drill Set For Stainless Steel
work material | general steel / Stainless Steel / Aluminum / Titanium | Tool Material Type | Cobalt HSS | Package vertical(mm) | 180 |
---|---|---|---|---|---|
Package horizontal(mm) | 110 | Package height(mm) | 20 | Shape | Machined with X-type thinning (3.0 mm or more) |
Shank | Hex shank | Shaft diameter(mm) | 6.35 | JAN code | 4904781384242 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |