CSSN Type (Outer Diameter Machining / End Machining / Chamfering)
CSSN Type (Outer Diameter Machining / End Machining / Chamfering)
Applicable Tip Shape | S (Rectangular) | Application | Outer Diameter / End Face / Chamfer | Clamp Shape | Clamp-on |
---|---|---|---|---|---|
Cutting Direction | Left-hand | Applicable Tip Clearance Angle Type | Negative | B(mm) | 25 |
F1(mm) | 32 | F2(mm) | 23 | H1=h(mm) | 25 |
L1(mm) | 150 | L2(mm) | 26 | Sheet | SP-141(SP-143) |
Wrench | LW-4 | Standard corner R (r?) | 0.8 | Clamp set | CE-020 |
Chip Breaker | CB-11 | Sheet stop screw | M3X8(M3X12) |
This page is CSSN Type (Outer Diameter Machining / End Machining / Chamfering), part number CSSNL2525M-12.
You can find the detail information about specifications and dimensions on part number CSSNL2525M-12.
Артикул: CSSNL2525M-12 Категории: Holding Tools for O.D. Tuning, Режущие инструменты
Похожие товары
Micro Drill «NEO PRO» Long Blades
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Carbide Tip Glass Drill
work material | Resin | Height(mm) | 6 | Width(mm) | 6 |
---|---|---|---|---|---|
Package vertical(mm) | 140 | Package horizontal(mm) | 30 | Package height(mm) | 10 |
Shank | Round shaft | Suitable operating rotation speed(min-1) | 500 |
GT Drill Set For Stainless Steel
work material | general steel / Stainless Steel / Aluminum / Titanium | Tool Material Type | Cobalt HSS | Package vertical(mm) | 180 |
---|---|---|---|---|---|
Package horizontal(mm) | 110 | Package height(mm) | 20 | Shape | Machined with X-type thinning (3.0 mm or more) |
Shank | Hex shank | Shaft diameter(mm) | 6.35 | JAN code | 4904781384242 |
GT Drill Bit Set For Ironworking
Tool Material Type | High-speed steel | Overall Length L(mm) | 150 | Coating Y/N | Available |
---|---|---|---|---|---|
JAN code | 4904781381753 |
Sweep Cut Drill Straight Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
tip angle(°) | 90 | Torsion(°) | 30 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
Solid Semi-Long Drill
work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
Torsion(°) | 30 |