Boring Tool Bit, CoroTurn 111, Screw Clamp, A…-SDXPR/L
Boring Tool Bit, CoroTurn 111, Screw Clamp, A…-SDXPR/L
Applicable Tip Shape | D (55° Diamond-Shape) | Minimum Machining Diameter | 22 | Application | Internal Diameter / Inner diameter profiling / Pull |
---|---|---|---|---|---|
Cutting Direction | Left-hand | Clamp Shape | Screw Clamp | Overall Length | 204.6 |
Clearance angle | 11° | Shank diameter | 16 | Protrusion length (L/D) | 24~64 |
Lubrication Hole Y/N | Available | Specifications | CORO-TURN 111 Screw Clamp Flat Chamfered Cylinder | Torque(Nm) | 0.9 |
Cutting Angle(°) | 62.5 | Tool Lead Angle(°) | 27.5 | Dimensions f1(mm) | 13 |
Dimension L1(mm) | 200 | Dimension H(mm) | 15 | Tip Size(mm) | 7 |
This page is Boring Tool Bit, CoroTurn 111, Screw Clamp, A…-SDXPR/L, part number A16RSDXPL07E.
You can find the detail information about specifications and dimensions on part number A16RSDXPL07E.
Артикул: A16RSDXPL07E Категории: Holding Tools for I.D. Tuning, Режущие инструменты
Похожие товары
Sweep Cut Drill Reamer Type 3 mm Shank
work material | Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
shank d(mm) | 3 | tip angle(°) | 90 | Torsion(°) | 30 |
Carbide 2-Flute Leading Drill 60° D921X
Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Tool Material Type | Carbide | Shank Type | End Mill Shank |
---|---|---|---|---|---|
Coating Type | Other | Tip angle(?) | 60 |
Micro Drill «NEO PRO» Standard Blade Length
work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Aluminum / Resin | Tool Material Type | Carbide | Shank Type | Pivot Type |
---|---|---|---|---|---|
Coating Y/N | Available | Coating Type | FCS | With/without Oil Hole | NA |
shank d(mm) | 3 | Torsion(°) | 30 |
GT Short Drill Set
work material | Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 130 | Package horizontal(mm) | 80 |
Package height(mm) | 12 | Shaft diameter(mm) | 6.35 | Drill bit hardness | HRC 58 to 63° |
JAN code | 4904781381234 |
HPD Hyper Burnishing Drill AH10
Work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Coating Y/N | NA |
---|---|---|---|---|---|
Coating Type | Non-Coated | With/without Oil Hole | NA |
GT Drill Set For Woodwork, WDS-05
Package vertical(mm) | 180 | Package horizontal(mm) | 90 | Package height(mm) | 17 |
---|---|---|---|---|---|
Shape | Spiral type | Shank | Hex shank | Shaft diameter(mm) | 6.35 |
Drill bit hardness | HRC 42 to 48° | JAN code | 4904781387045 |
GT Titanium Drill Set
work material | general steel / Aluminum / Resin | Tool Material Type | High-speed steel | Coating Y/N | Available |
---|---|---|---|---|---|
Coating Type | TiN | Package vertical(mm) | 190 | Package horizontal(mm) | 108 |
Package height(mm) | 16 | JAN code | 4904781381739 |