Back to products
Режущие инструменты
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500PQ «for Finishing to Intermediate Cutting»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500PS «for Intermediate to Rough Cutting»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium to deep grinding | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500PT «for Intermediate to Rough Cutting / High-Feed»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium to deep grinding | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500TK, «for Intermediate to Rough Cutting» for Stainless Steel / Heat Resistant Alloy
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium to deep grinding | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500TN-V «for Intermediate Cutting»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| work material | Steel / Stainless Steel / Cast Iron | Breaker Use | Medium grinding | Rake angle | Negative |
| Cutting Direction | No-hand | Nose R | 0.8 | r? | 0.8 |
| Material | TN60 |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500XF «for Finishing / Small Incision» for Mild Steel
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| work material | Steel / Stainless Steel | Breaker Use | Finish | Rake angle | Negative |
| Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500XP «for Finishing» for Mild Steel
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Finish | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500XQ «for Intermediate Cutting» for Mild Steel
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500XS «for Rough Cutting» for Mild Steel
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Heavy cutting | Rake angle | Negative | Cutting Direction | No-hand |
| Nose R | 0.8 | r? | 0.8 |
Turning Insert Diamond 55°, Negative, with Hole, DNMG1500ZS «for Rough Cutting» for Cast Iron
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| work material | Cast Iron | Breaker Use | Heavy cutting | Rake angle | Negative |
| Cutting Direction | No-hand |
Turning Insert Diamond 55°, Negative, with Hole, DNMM1500PX «Single-Sided / for Rough Cutting / High-Feed»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 2 |
|---|---|---|---|---|---|
| work material | Steel | Breaker Use | Heavy cutting | Rake angle | Negative |
| Cutting Direction | No-hand |
Turning Insert Diamond 55°, Positive, with Hole, DCET «Low-Feed»
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 2 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Pozidriv |