Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Carbide |
---|---|---|---|---|---|
Work material | Cast Iron (FC) / Ductile Cast Iron (FCD) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) / Thermosetting plastic (bakelite, phenol, etc.) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | NA | Coating Type | Non-Coated | Accuracy | JIS2 |
Number of Grooves | 4 |
Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Vanadium high-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Quenched and tempered steel (25 to 35 HRC) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 4 |
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Vanadium high-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Quenched and tempered steel (25 to 35 HRC) / Quenched and tempered steel (35 to 45 HRC) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 4 |
Taper Tap Series for Pipes TIN Coated TIN-TPT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Vanadium high-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Quenched and tempered steel (25 to 35 HRC) / Quenched and tempered steel (35 to 45 HRC) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 4 |
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Vanadium high-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Stainless steel (SUS) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 5 | Torsional Angle(°) | 8 (Reverse twist) |
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Carbide |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Stainless steel (SUS) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 5 |
Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | Carbide |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Stainless steel (SUS) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiN | Accuracy | JIS2 |
Number of Grooves | 5 |
Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT
Screw Types | Taper for Pipe | Chamfer threads | 3P | Tool Material Type | Carbide |
---|---|---|---|---|---|
Work material | High Hardness Steel (50-60 HRC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | Available | Coating Type | TiCN | Accuracy | JIS2 |
Taper Tap Series for Pipes With Oil Hole OIL-TPT
Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Zinc Alloy Casting (ZDC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
Coating Y/N | NA | Coating Type | Non-Coated | Accuracy | JIS2 |
Number of Grooves | 4 |
Tapered Ball End Mill
R Size(mm) | 6 | Type | Tapered neck ball | work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper |
---|---|---|---|---|---|
Blade length (?)(mm) | 42.0 | Number of flutes(sheet) | 4 | Coating | PVD |
Overall Length (L)(mm) | 115 | Underneck length (?1)(mm) | 43.5 | Shank diameter (d)(mm) | 16 |
Machining Application | Curved surface | Tool Diameter(mm) | 12 | Torsional Angle(deg) | 40 |
Specifications | Spherical Design | Axial rake angle ?0(deg) | 12 | Dimensions ?21(deg) | 3 |
Tapered Long Blade End Mill NTEL-2
Type | Tapered square | Work material | General steel / Quenched and tempered steel / Stainless Steel / Aluminum / Copper / Resin | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | Non-Coated |
Tapered Long Blade End Mill NTEL-4
Type | Tapered square | Work material | General steel / Quenched and tempered steel / Stainless Steel / Aluminum / Copper / Resin | Number of flutes(sheet) | 4 |
---|---|---|---|---|---|
Coating | Non-Coated |