Back to products
Режущие инструменты
Standard Ball End Mill, 4-Flute
| Type | Ball | work material | general steel / Quenched and tempered steel / Stainless Steel / Aluminum / Resin | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Tolerance(?m) | ±0.01 | Machining Application | Curved surface / Side / Engraving / R Groove |
| Torsion(°) | 30 |
Standard Insert For Roll Machining, RBGX
| Shape | Other | work material | High Hardness Material | Material type | B22 |
|---|---|---|---|---|---|
| Material classification | Non-coated CBN |
Standard Insert TFD-AM3
| Shape | Other | work material | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | Cutting Direction | Right-hand |
|---|---|---|---|---|---|
| Nose R | Other | Material type | DT4 | Material classification | PVD-coated micrograin carbide |
| Inscribed circle (IC)(mm) | 9.525 | Thickness (T)(mm) | 3.97 | Clearance angle(°) | 7 |
Standard Insert, 35° Diamond-Shape, Negative, VNGA
| Shape | V (35° Diamond-Shaped) | Rake angle | Negative | Inscribed circle (IC)(mm) | 9.525 |
|---|---|---|---|---|---|
| Thickness (T)(mm) | 4.76 |
Standard Insert, 35° Diamond-Shape, Negative, VNGG-ZP
| Shape | V (35° Diamond-Shaped) | work material | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | Rake angle | Negative |
|---|---|---|---|---|---|
| Material classification | PVD-coated micrograin carbide | Inscribed circle (IC)(mm) | 9.525 | Thickness (T)(mm) | 4.76 |
Standard Insert, 35° Diamond-Shape, Negative, VNMG-AM1
| Shape | V (35° Diamond-Shaped) | Rake angle | Negative | Inscribed circle (IC)(mm) | 9.525 |
|---|---|---|---|---|---|
| Thickness (T)(mm) | 4.76 |
Standard Insert, 35° Diamond-Shape, Negative, VNMG-G
| Shape | V (35° Diamond-Shaped) | work material | Cast Iron | Rake angle | Negative |
|---|---|---|---|---|---|
| Material type | CP1 | Material classification | CVD-coated carbide | Inscribed circle (IC)(mm) | 9.525 |
| Thickness (T)(mm) | 4.76 |
Standard Insert, 35° Diamond-Shape, Negative, VNMG-WM
| Shape | V (35° Diamond-Shaped) | work material | Steel / Cast Iron / Non-ferrous metal | Rake angle | Negative |
|---|---|---|---|---|---|
| Nose R | 0.8 | Material type | C7Z | Material classification | PVD cermet |
| Inscribed circle (IC)(mm) | 9.525 | Thickness (T)(mm) | 4.76 |
Standard Insert, 35° Diamond-Shape, Positive, VBGT-YL
| Shape | V (35° Diamond-Shaped) | Rake angle | Pozidriv | Nose R | 0.4 |
|---|---|---|---|---|---|
| Material classification | PVD-coated micrograin carbide | Inscribed circle (IC)(mm) | 9.525 | Thickness (T)(mm) | 4.76 |
| Clearance angle(°) | 5 |
Standard Insert, 35° Diamond-Shape, Positive, VBGW/VCGW
| Shape | V (35° Diamond-Shaped) | Rake angle | Pozidriv | Material classification | Non-coated CBN |
|---|
Standard Insert, 35° Diamond-Shape, Positive, VCET-UHG
| Shape | V (35° Diamond-Shaped) | work material | Steel / Stainless Steel / Non-ferrous metal | Rake angle | Pozidriv |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Nose R | Other | Material type | VM1 |
| Material classification | PVD-coated micrograin carbide | Inscribed circle (IC)(mm) | 6.35 | Thickness (T)(mm) | 3.18 |
| Clearance angle(°) | 7 | Nose R details(mm) | 0.08 |
Standard Insert, 35° Diamond-Shape, Positive, VCGT-AZ7
| Shape | V (35° Diamond-Shaped) | Rake angle | Pozidriv | Nose R | Other |
|---|---|---|---|---|---|
| Material classification | PVD-coated micrograin carbide | Inscribed circle (IC)(mm) | 6.35 | Thickness (T)(mm) | 3.18 |
| Clearance angle(°) | 7 |