Back to products
Режущие инструменты
Stage Drill Hexagon Shaft Type
Shaft Diameter | 6.35 mm Hex Shaft (With Ball Groove) | Maximum Drilling Thickness: Steel Sheet(mm) | 2.0 | Maximum Drilling Thickness: Wood/Plastic(mm) | 3.0 |
---|
Stage Drill Hexagon Shaft Type Tin Coating
Shaft Diameter | 6.35 mm Hex Shaft (With Ball Groove) | Maximum Drilling Thickness: Steel Sheet(mm) | 2.0 | Maximum Drilling Thickness: Stainless Steel(mm) | 1.0 |
---|---|---|---|---|---|
Maximum Drilling Thickness: Wood/Plastic(mm) | 3.0 |
Stage Drill Straight Shaft Type
Shaft Diameter | ?10 mm (Three-Sided Chamfer) | Maximum Drilling Thickness: Wood/Plastic(mm) | 3.0 |
---|
Staggered Blade Side Cutter
Tool Material Type | Cobalt HSS (SKH55) | Machining Application | Side surface, groove | Coating | Non-Coated |
---|
Staggered Blade Side Cutter SS
Material | MCO | work material | Steel / Cast Iron / Stainless Steel / Aluminum / Copper Alloys |
---|
Staggered Blade T-Slot Cutter
Tool Material Type | Cobalt HSS (SKH56) | Machining Application | T-Groove/Side | Coating | Non-Coated |
---|
Stainless Steel Drill 3 X D RT100VA 8510
Tool Material Type | Carbide | Coating Y/N | Available | Coating Type | Other |
---|---|---|---|---|---|
With/without Oil Hole | Available | Number of flutes(sheet) | 2 | tip angle(°) | 140 |
Stainless Steel Drill 5 X D RT100VA 8511
Tool Material Type | Carbide | Coating Y/N | Available | Coating Type | Other |
---|---|---|---|---|---|
With/without Oil Hole | Available | Number of flutes(sheet) | 2 | tip angle(°) | 140 |
Stainless Steel Hand Tap SU-HT
Tool Material Type | High-speed steel | work material | Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Quenched and tempered steel (25 to 35 HRC) / Steel casting (SC) | Tap Type | Hand Tap |
---|---|---|---|---|---|
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Stainless Steel Hand-Type
Screw Types | Meter | Chamfer threads | 5P | Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Stainless steel (SUS) / Quenched and tempered steel (25 to 35 HRC) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) |
---|---|---|---|---|---|
Tap Type | Hand Tap | Material Details | SKH | Tap Details | Medium |