Back to products
Режущие инструменты
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | Number of flutes(sheet) | 4 | Type | Roughing |
---|---|---|---|---|---|
Coating | OK Coated | Machining Application | Plane / Side / Groove | Blade tip shape | C plane |
Torsion Angle (?) | Weak torsion (15 to 25?) |
SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated
work material | general steel / Quenched and tempered steel / Stainless Steel | Number of flutes(sheet) | 3 | Type | Roughing |
---|---|---|---|---|---|
Coating | OK Coated | Machining Application | Side / Groove | Torsion Angle (?) | Standard torsion (30-40°) |
Square 90°, Negative SNGA
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Rake angle | Negative |
---|---|---|---|---|---|
Cutting Direction | No-hand |
Square 90°, Negative SNGX
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Rake angle | Negative |
---|---|---|---|---|---|
Cutting Direction | No-hand |
Square 90°, Negative SNMN
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | work material | Cast Iron |
---|---|---|---|---|---|
Rake angle | Negative | Cutting Direction | No-hand | Nose R | 1.6 |
r? | 1.6 | Material | A65 |
Square 90°, Negative, with Hole / without Hole SNMG120400-GC «Rough Cutting», Cast Iron
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Heavy cutting | Rake angle | Negative | Cutting Direction | No-hand |
Square 90°, Negative, with Hole SNGA120400 No Breaker «Cast Iron»
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
Square 90°, Negative, with Hole SNGG090300-B «Finishing to Semi-Finishing»
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Medium grinding | Rake angle | Negative |
Square 90°, Negative, with Hole SNGG120400-25R «Semi to Rough», Low Resistance
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Medium to deep grinding | Rake angle | Negative |
Square 90°, Negative, with Hole SNGG120400-C «Semi to Rough»
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Heavy cutting | Rake angle | Negative |
Square 90°, Negative, with Hole SNMA120400 No Breaker «Cast Iron»
Shape | S (Rectangular) | Application | Outer Diameter/Inner Diameter | Available corners | 8 |
---|---|---|---|---|---|
Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |