Back to products
Режущие инструменты
Small-Nega for Automatic Grid DNGU [Finishing to Middle]
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
| Nose R | Other |
Small-Nega for Automatic Grid DNGU [Low Feed]
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | Right-hand |
| Nose R | Other |
Small-Nega for Automatic Grid DNMU [Middle to Roughing]
| Shape | D (55° Diamond-Shape) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
Small-Nega for Automatic Grid TNGU [Finishing]
| Shape | T (Triangle) | Application | Outer Diameter/Inner Diameter | Available corners | 4 |
|---|---|---|---|---|---|
| Breaker Use | Finish | Rake angle | Negative | Cutting Direction | Right-hand |
| Nose R | Other |
SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining
| Type | Ball | work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / High hardness steel –HRC65 / Stainless Steel | Number of flutes(sheet) | 1 |
|---|---|---|---|---|---|
| Coating | Non-Coated | Overall Length (L)(mm) | 50 | Shank diameter (d)(mm) | 4 |
| Machining Application | Curved surface / Side / Engraving / R Groove |
SMEZ120 CBN Micro Edge Z
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / High hardness steel –HRC65 | Number of flutes(sheet) | 1 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Shank diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Blade tip shape | Sharp Edge | Torsion Angle (?) | Weak torsion (15 to 25°) |
| (?) Neck Angle(°) | 15 |
Solid Ball End Mill (for Aluminum Etc.) with Rounded Rake Angle AL-DBPS2 Type
| Type | Ball | work material | Aluminum / Copper | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Precision(?m) | 0~-50 | Machining Application | Curved surface / R Groove |
Solid Ball End Mill LN-SBEL
| Type | Ball | Number of flutes(sheet) | 2 | Coating | Non-Coated |
|---|---|---|---|---|---|
| Machining Application | Curved surface / Engraving / R Groove |
Solid Ball End Mill SBEL
| Type | Ball | work material | general steel / Quenched and tempered steel / Graphite | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Precision(?m) | 0~-50 | Machining Application | Curved surface / Engraving / R Groove |
Solid Ball-End Mill for Graphite GF-SBL Type
| Type | Ball | work material | Graphite | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Precision(?m) | 0~-40 | Machining Application | Curved surface / Engraving / R Groove |
Solid Ball-End Mill for Graphite GF-SBR Type
| Type | Ball | work material | Graphite | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Precision(?m) | 0~-40 | Machining Application | Curved surface / Engraving / R Groove |
Solid Ball-End Mill for Graphite GF-SBX Type
| Type | Ball | work material | Graphite | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | Non-Coated | R Precision(?m) | 0~-40 | Machining Application | Curved surface / Engraving / R Groove |