Back to products
Режущие инструменты
Short Bull Point
Application | For concrete chipping and crushing | Size(mm) | (Shaft Diameter) 17H (Overall Length) 240 | Apply | Hammer Drill |
---|---|---|---|---|---|
Material | SCM Material (Chrome Molybdenum Steel) |
Short Point Tap for Deep Holes S-PO
Screw Types | Meter | Chamfer threads | 5P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
Tap Type | Point tap | Hole type | For through hole | Coating Y/N | NA |
Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
Shank Type | End Mill Shank | work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Alloy Steel | Coating Y/N | NA |
---|---|---|---|---|---|
Groove Shape | Helical | Base Blade Y/N | NA |
Short Powerful Carbide Reamer (0.1 mm Jump) CPRS
Shank Type | End Mill Shank | work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Alloy Steel | Coating Y/N | NA |
---|---|---|---|---|---|
Groove Shape | Helical | Base Blade Y/N | NA |
Short Spiral Tap for Deep Holes S-SP
Screw Types | Meter | Chamfer threads | 2.5P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
Tap Type | Spiral Tap | Hole type | For blind hole | Coating Y/N | NA |
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF
Application | Outer Diameter Grooving / Cutting off | Groove Width(mm) | 0.5-3.18 | Maximum Machining Diameter(mm) | 1 |
---|---|---|---|---|---|
Maximum Groove Depth(mm) | 6.4 | Cutting Direction | Left-hand | Number of corners for tip use | 3 Corner |
Shank height(mm) | 10 | Details Type | U | Dimension B(mm) | 10 |
Dimension H1(mm) | 10 | Gauge Chip | N123U3-0150-CM | Tip tightening torque(Nm) | 3 |
Overall Length(mm) | 70 |
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123
Application | Outer Diameter Grooving / Cutting off | Cutting Direction | Left-hand | Number of corners for tip use | 3 Corner |
---|---|---|---|---|---|
Details Type | U | Dimension L3(mm) | 23 | Usable length(mm) | 6.4 |
Gauge Chip | N123U3-0150-CM | Tip tightening torque(Nm) | 3 | Overall Length(mm) | 70 |
Short Tool Bit For QS Holding System, For Turning, Parting, Grooving & Threading QS-SMALR/L-HP
Application | Outer Diameter Grooving / Cutting off | Number of corners for tip use | 2 Corner | Dimension L3(mm) | 28 |
---|---|---|---|---|---|
Gauge Chip | MAxL 3.. | Tip tightening torque(Nm) | 1.2 | Overall Length(mm) | 70 |