Back to products
Режущие инструменты
SDSET50 Ironworking Drill, Set of 50
| Diameter Dc(mm) | 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.7 / 1.8 / 1.9 / 2 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / 2.7 / 2.8 / 2.9 / 3 / 3.1 / 3.2 / 3.3 / 3.4 / 3.5 / 3.6 / 3.7 / 3.8 / 3.9 / 4 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 4.6 / 4.7 / 4.8 / 4.9 / 5 / 5.1 / 5.2 / 5.3 / 5.4 / 5.5 / 5.6 / 5.7 / 5.8 / 5.9 / 6 | work material | general steel / Cast Iron / Aluminum | Tool Material Type | High-speed steel |
|---|---|---|---|---|---|
| Dimensions ?2(mm) | 6 / 2 / 2.5 / 2.8 / 3 / 3.2 / 3.3 / 3.5 / 3.7 / 3.8 / 4 / 4.2 / 4.5 / 4.8 / 5 / 5.5 / 1.5 / 1.1 / 1.2 / 1.3 / 1.4 / 1.6 / 1.7 / 1.8 / 1.9 / 2.1 / 2.2 / 2.3 / 2.4 / 2.6 / 2.7 / 2.9 / 3.1 / 3.4 / 3.6 / 3.9 / 4.1 / 4.3 / 4.4 / 4.6 / 4.7 / 4.9 / 5.1 / 5.2 / 5.3 / 5.4 / 5.6 / 5.7 / 5.8 / 5.9 |
SDXC Type (External Diameter, End Face, Profiling)
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / Profiling | Clamp Shape | Screw-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Pozidriv | L1(mm) | 120 | Standard corner R (r?) | 0.2 |
SDXJP Ironworking Drill (with Thinning)?1-2 Pieces Per Package?
| work material | general steel / Cast Iron / Aluminum | Tool Material Type | High-speed steel |
|---|
SE Shell End Mill
| Material | MCO | work material | Steel / Cast Iron / Stainless Steel / Aluminum / Copper Alloys |
|---|
Seamless TAFLET
| Screw Types | Meter | Tool Material Type | High-speed steel | Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Stainless steel (SUS) / Copper (Cu) / Brass (Bs) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) |
|---|---|---|---|---|---|
| Tap Type | Taflet | Coating Y/N | Available | Surface Treatment | TiCN |
SEC-Multi Drill Head SMD Type
| Work material | General steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum Alloy | Coating Type | DEX/GS Hard | With/without Oil Hole | Available |
|---|---|---|---|---|---|
| Material type | ACX70 | Drill Hole Depth (L/D)(mm) | 1.5 |
SEC-Sumi Dual Mill, DFC09000E Type (Standard Type)
| Machining Application | Plane / Side | Mounting Method | With handle | Underneck length (?1)(mm) | 80 |
|---|
SEC-Sumi Dual Mill, DFC09000R (S) Type (Standard Type)
| Machining Application | Plane / Side | Mounting Method | Arbor |
|---|
SEC-Sumi Dual Mill, DFCF09000R (S) Type (Extra Fine Pitch)
| Machining Application | Plane / Side | Mounting Method | Arbor |
|---|
SEC-Sumi Dual Mill, DFCM09000R (S) Type (Fine Pitch)
| Machining Application | Plane / Side | Mounting Method | Arbor |
|---|