Back to products
Режущие инструменты
SCD Counter Sinking Drill for Flat Head Screws
work material | general steel / Quenched and tempered steel / Cast Iron / Aluminum | Tool Material Type | High-speed steel | Shank Type | straight shank |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated | With/without Oil Hole | NA |
SCD2 End Mill with Corner R, 2-Flute, Non-Coated
work material | general steel / Quenched and tempered steel / Aluminum / Copper | Number of flutes(sheet) | 2 | Type | radius |
---|---|---|---|---|---|
Machining Application | Plane / Groove | Coating | Non-Coated | Torsion Angle (?) | Standard torsion (30-40°) |
Blade diameter tolerance(mm) | -0.03~-0.01 |
SCD2A End Mill with Corner R, 2-Flute, OK Coated
work material | general steel / Quenched and tempered steel / High Hardness Steel-HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium | Number of flutes(sheet) | 2 | Type | radius |
---|---|---|---|---|---|
Machining Application | Plane / Groove | Coating | OK Coated | Torsion Angle (?) | Standard torsion (30-40°) |
Blade diameter tolerance(mm) | -0.03~-0.01 |
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
work material | general steel / Quenched and tempered steel / High Hardness Steel-HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium | Number of flutes(sheet) | 4 | Type | radius |
---|---|---|---|---|---|
Machining Application | Plane / Side / Groove | Coating | OK Coated | Torsion Angle (?) | Powerful Torsion (45°-60°) |
Blade diameter tolerance(mm) | -0.03~-0.01 |
SCLC Type (External Diameter/End-Face Machining)
Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Screw-on |
---|---|---|---|---|---|
Applicable Tip Clearance Angle Type | Pozidriv |
SCLC Type Diamond-Shaped 80° Insert-Compatible J-C-SCLCR/L
Applicable Tip Shape | C (80° Diamond-Shape) | Application | Internal Diameter / Pull | Cutting Direction | Right-hand |
---|---|---|---|---|---|
Clamp Shape | Screw Clamp | Lubrication Hole Y/N | NA | Specifications | Carbide bit, with flat face |
Cutting Angle(°) | 95 |
SCLC-FF Type (without Offset) (External Diameter / End Face Machining)
Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Screw-on |
---|---|---|---|---|---|
Applicable Tip Clearance Angle Type | Pozidriv | S(mm) | 0 | Standard corner R (r?) | 0.2 |
SCLN Type (without Offset) (External Diameter / End Face Machining)
Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Screw-on |
---|---|---|---|---|---|
Cutting Direction | Right-hand | Applicable Tip Clearance Angle Type | Negative | S(mm) | 0 |
L2(mm) | 15 | Wrench | LTW-10SS | Standard corner R (r?) | 0.2 |
Clamp screw | SB-3080TR | Compatible Tip | CNGU0703..?CNMU0703.. |
Screw
Weight(g) | 1 | Tool Style | 438.3 |
---|
Screw Cutting Die Series, Tapered Screw Cutting Round Dies for Pipes, TPD-H-NPT
Screw Types | Taper for Pipe | Tool Material Type | High-speed steel | Tap Type | Die |
---|---|---|---|---|---|
Coating Y/N | NA | Coating Type | Non-Coated |