Back to products
Режущие инструменты
S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)
| Applicable Tip Shape | W (Hexagonal Type) | Application | Internal Diameter | Clamp Shape | Screw-on |
|---|---|---|---|---|---|
| Protrusion length (L/D) | ~5.5 |
S32MOZ Chip S32GUR
| Application | Chamfering/Horizontal / Round Chamfer | Number Contained In A Packet(Piece) | 12 |
|---|
S32MOZ Chip S32GUR-DIA
| Application | Chamfering/Horizontal / Round Chamfer | work material | Aluminum / Resin | Coating Y/N | NA |
|---|---|---|---|---|---|
| Coating Type | Non-Coated | Material Details | Sintering diamond | Edge Shape | Sharp edge |
| Number Contained In A Packet(Piece) | 1 |
S32MOZ Chip S32MOZ
| Application | Chamfering/Horizontal / Round Chamfer | Number Contained In A Packet(Piece) | 12 |
|---|
SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)
| Applicable Tip Shape | Other | Application | Post-Grinding | Clamp Shape | Other |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Wrench | FT-10 | Standard corner R (r?) | 0.15 |
| Clamp screw | SB-3080TR |
SABW-40F Type (Cutting Edge Width 4.7 mm, Depth 4 mm Max.)
| Applicable Tip Shape | Other | Application | Post-Grinding | Clamp Shape | Other |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Wrench | FT-10 | Standard corner R (r?) | 0.15 |
| Clamp screw | SB-3080TR |
SAC2 Solid 2-Blade A Cut End Mill MA
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Side / Groove / Countersinking | Torsion Angle (?) | Standard torsion (30-40°) |
SAC2 Solid Long 2-Blade A Cut End Mill MA
| Work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | Number of flutes(sheet) | 2 | Type | Long-Neck Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Side / Groove / Countersinking | Blade tip shape | With Land |
| Torsion Angle (?) | Standard torsion (30-40°) |
SAC4 Solid 4-Blade A Cut End Mill MA
| Work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Side / Groove | Blade tip shape | With Land |
| Torsion Angle (?) | Standard torsion (30-40°) |
SAD2 Square End Mill for Aluminum, 2-Flute, Non-Coated
| work material | Aluminum / Copper | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Plane / Side / Groove | Blade tip shape | Sharp Edge |
| Torsion Angle (?) | Standard torsion (30-40°) |
SAD2D Square End Mill for Aluminum, 2-Flute, Pure DLC-Coated
| work material | Aluminum / Copper | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | DLC | Machining Application | Plane / Side / Groove | Blade tip shape | Sharp Edge |
| Torsion Angle (?) | Standard torsion (30-40°) |
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
| work material | Aluminum / Copper | Number of flutes(sheet) | 3 | Type | High Helical |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Plane / Side / Groove / Countersinking | Blade tip shape | Sharp Edge |
| Torsion Angle (?) | Powerful Torsion (45°-60°) |