Back to products
Режущие инструменты
Round Shaft Drill Saw
| Size(mm) | 6 | Overall Length L(mm) | 95 | Screw Length SL(mm) | 68 |
|---|---|---|---|---|---|
| Shaft diameter d(mm) | 6 | Shaft type | Round shaft | Target material | General wood, plywood for structuring, siding, hard building materials, aluminum sheets, sheet iron (up to 1.2 mm thickness) |
| Material | HSS / Titanium Coating Finish |
Round Spiral Coil
| Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) | Tap Type | Thread-cutting-related tool |
|---|
Round-Shape With Hole, Positive 7°, RCMT-RX, For Medium To Rough Cutting
| Shape | R (Circular) | Rake angle | Pozidriv | Cutting Direction | No-hand |
|---|---|---|---|---|---|
| Clearance angle(°) | 7 | Slot Hole Symbol | T |
Round-Shape With Hole, Positive 7°, RCMX-RP, For Rough Cutting
| Shape | R (Circular) | Rake angle | Pozidriv | Cutting Direction | No-hand |
|---|---|---|---|---|---|
| Clearance angle(°) | 7 | Slot Hole Symbol | X |
Round, Negative
| Shape | R (Circular) | Application | Outer Diameter/Inner Diameter | Rake angle | Negative |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | r? | - |
Round, Negative, with Hole RNMG
| Shape | R (Circular) | Application | Outer Diameter/Inner Diameter | Available corners | 9 or more |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Negative | Cutting Direction | No-hand |
| r? | - |
Round, Positive, with Hole RCGX/RCMX
| Shape | R (Circular) | Application | Outer Diameter/Inner Diameter | Available corners | 9 or more |
|---|---|---|---|---|---|
| Breaker Use | Medium grinding | Rake angle | Pozidriv | Cutting Direction | No-hand |
| r? | - |
Router Bit
| Application | Chamfering / Inlay Work / Mortise Carving | Shaft Diameter(mm) | 3.2 | Number Contained In A Packet(mm) | 1 |
|---|---|---|---|---|---|
| Usable DREMEL tool(mm) | 4,000 / 8,200 / 300 Series |
Router Bit, Straight Bit with Guide Bearing
| Product Type | Straight with Guide Bearings | Number Contained In A Packet | 1 |
|---|
Router Series for CFRP, Iris Melter DIA-DCR
| Type | Roughing | Coating | Dia Coat | Machining Application | Plane / Side / Inclined Cuts |
|---|---|---|---|---|---|
| Blade tip shape | With Lead | Torsion Angle (?) | No torsion |