Back to products
Режущие инструменты
PSKN Type (End Face Machining)
| Applicable Tip Shape | S (Rectangular) | Application | End Face | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |
PSSN Type (External Diameter, End Face, Chamfering)
| Applicable Tip Shape | S (Rectangular) | Application | Outer Diameter / End Face / Chamfer | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |
PT (LH) for Tapered Pipe Thread (Long Screw Type for Left-Hand Thread)
| Screw Types | Taper for Pipe | Chamfer threads | 2.5P | Tool Material Type | High-speed steel |
|---|---|---|---|---|---|
| work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Brass (Bs) / Brass cast iron (BsC) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Tap for pipes | Hole type | For through hole / For blind hole |
| Coating Y/N | NA | Class | ? | Shape | h |
PTFN Type (End Face Machining)
| Applicable Tip Shape | T (Triangle) | Application | End Face | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |
PTGN Type (Outer Diameter Machining)
| Applicable Tip Shape | T (Triangle) | Application | Outer Diameter | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |
PTLN-FF Type (without Offset) (External Diameter, Pull End Face Machining)
| Applicable Tip Shape | T (Triangle) | Application | Outer Diameter | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Applicable Tip Clearance Angle Type | Negative | B(mm) | 20 |
| F1(mm) | 20 | H1=h(mm) | 16 | S(mm) | 0 |
| L1(mm) | 120 | L2(mm) | 24 | Sheet | LT-32N?LT-32N-20 |
| Wrench | FH-2.5 | Lever | LL-1N | Lock screw | LS-1N |
| Shim Pin | LSP-1 | Punch | PC-1 | Standard corner R (r?) | 0.8 |
PVLN Type (External Diameter, Profiling)
| Applicable Tip Shape | V (35° Diamond-Shaped) | Application | Outer Diameter / Profiling | Clamp Shape | Pin Lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | B(mm) | 25 | F1(mm) | 32 |
| H1=h(mm) | 25 | L1(mm) | 150 | L2(mm) | 37 |
| Sheet | KVN-32 | Wrench | LW-3 | Lock screw | LS-15 |
| Standard corner R (r?) | 0.8 | Lock pin | LP-6S |
PVPN Type (External Diameter, Copying/Undercutting)
| Applicable Tip Shape | V (35° Diamond-Shaped) | Application | Outer Diameter / End Face / Profiling | Clamp Shape | Pin Lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | L2(mm) | 30 | Sheet | KVN-32 |
| Wrench | LW-3 | Lock screw | LS-11 | Standard corner R (r?) | 0.8 |
PVVN Type (External Diameter, Profiling)
| Applicable Tip Shape | V (35° Diamond-Shaped) | Application | Outer Diameter / Profiling | Clamp Shape | Pin Lock |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | Applicable Tip Clearance Angle Type | Negative | Sheet | KVN-32 |
| Wrench | LW-3 | Lock screw | LS-15 | Standard corner R (r?) | 0.8 |
PWLN Type (External Diameter/End-Face Machining)
| Applicable Tip Shape | W (Hexagonal Type) | Application | Outer Diameter / End Face | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |