Back to products
Режущие инструменты
PCD Square End Mill PCDSE
| Type | Square | Coating | Non-Coated | Shank diameter (d)(mm) | 4 |
|---|---|---|---|---|---|
| Overall Length (L)(mm) | 48 | Machining Application | Plane / Side / Groove | Blade tip shape | With Lead |
| Torsion Angle (?) | No torsion | (?) Neck Angle(°) | 15 |
PCLN Type (External Diameter/End-Face Machining)
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Standard corner R (r?) | 0.8 |
PCLN-FF Type (without Offset) (External Diameter / End Face Machining)
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Applicable Tip Clearance Angle Type | Negative | B(mm) | 20 |
| F1(mm) | 20 | S(mm) | 0 | L1(mm) | 120 |
| L2(mm) | 26 | Sheet | LC-42N | Wrench | LW-3 |
| Lever | LL-2N | Lock screw | LS-2N | Shim Pin | LSP-2 |
| Punch | PC-2 | Standard corner R (r?) | 0.8 |
PDHN Type (External Diameter, End Face, Profiling)
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / End Face / Profiling | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | L2(mm) | 36 | Sheet | ?LD-43?LD-43-20(LD-42)(?LD-42-20) |
| Wrench | LW-3 | Lever | LL-4 | Lock screw | LS-3 |
| Shim Pin | LSP-2 | Punch | PC-2 | Standard corner R (r?) | 0.8 |
PDJN Type (External Diameter, Profiling)
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / Profiling | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative |
Pencil Neck Ball End Mill Short 4-Flute GF200B 3045
| Type | Ball | Number of flutes(sheet) | 4 | Coating | Other |
|---|---|---|---|---|---|
| Torsional Angle(°) | 30 |
Performance Drill Inco (for Heat Resistant Alloy / Internal Lubrication Type)
| Effective machining depth | 5D (5 x blade diameter) |
|---|
Performance EndMill End Mill Dedicated to Titanium Machining (4-Blade)
| Number of flutes(sheet) | 4 | Type | Radius | Coating | Non-Coated |
|---|---|---|---|---|---|
| Torsion Angle (?) | 39° | Number Contained In A Packet | 1 pc. |