Back to products
Режущие инструменты
Outer Diameter Holder CSDN Type (Outer Diameter / Chamfering Machining)
| Applicable Tip Shape | S (Rectangular) | Application | Outer Diameter / Chamfer | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | Applicable Tip Clearance Angle Type | Negative | B(mm) | 25 |
| F1(mm) | 12.5 | H3 | 15mm |
Outer Diameter Holder CSSN Type (Outer Diameter / End Surface / Chamfering Machining)
| Applicable Tip Shape | S (Rectangular) | Application | Outer Diameter / End Face / Chamfer | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| H3 | 15 |
Outer Diameter Holder KTN Type
| Cutting Direction | Left-hand | H3(mm) | 8.5 | L2(mm) | 25 |
|---|---|---|---|---|---|
| Sheet | FT-15 | Clamp set | CPS-5S | Compatible Tip | 16EL |
Outer Diameter Holder, CCLN Type (Outer Diameter / End Surface Machining)
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| L2(mm) | 35 | H3 | 15 |
Outer Diameter Holder, CDHN Type (Outer Diameter / Profiling/Pulling Machining)
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / Profiling | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| L2(mm) | 33 | Sheet | 70.91.22.020.0 | Standard corner R (r?) | 0.8 |
| H3 | 15 |
Outer Diameter Holder, CDJN Type (Outer Diameter / Profiling Machining)
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / Profiling | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| L2(mm) | 38 | Sheet | 70.91.22.020.0 | Standard corner R (r?) | 0.8 |
| H3 | 15 |
Outer Diameter Holder, CRDN Type (Outer Diameter / Profiling Machining)
| Applicable Tip Shape | R (Circular) | Application | Outer Diameter / Profiling | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 |
| F1(mm) | 12.5 | L2(mm) | 32 | Wrench | LTW-25/LTW-20 |
| Clamp set | 70.91.15.001.0 | H3 | 15 |
Outer Diameter Holder, CRDN-09 Type (Outer Diameter / Profiling Machining)
| Applicable Tip Shape | R (Circular) | Application | Outer Diameter / Profiling | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Cutting Direction | No-hand | Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 |
| F1(mm) | 12.5 | L2(mm) | 27 | Sheet | 70.91.53.420.0 |
| Wrench | LW-4/LW-2 | Clamp set | 70.91.11.091.0 | Compatible Tip | RN??0904… |
| H3 | 11 |
Outer Diameter Holder, CRSN-09 Type (Outer Diameter / End Surface Machining)
| Applicable Tip Shape | R (Circular) | Application | Outer Diameter / End Face | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| L2(mm) | 26 | Sheet | 70.91.53.420.0 | Wrench | LW-4/LW-2 |
| Clamp set | 70.91.11.091.0 | Compatible Tip | RN??0904… | H3 | 11 |
Outer Diameter Holder, CSKN Type (End Surface Machining)
| Applicable Tip Shape | S (Rectangular) | Application | End Face | Clamp Shape | Clamp-on |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | Shank width(mm) | 25 | F1(mm) | 32 |
| H3 | 15 |