Back to products
Режущие инструменты
Joint Router Bit
| Blade size(mm) | D (Width) 12.7 x H (Height) 14/Bearing 12.7 | Shaft Diameter(mm) | 6 |
|---|
Joint Tool for Counter Sink Drilling Machine 90° JO-CSQM
| Application | Centering (Positioning) / Hole Chamfer | Tip angle (?) | 90 | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | NA | Tool Material Type | High-speed steel | Coating Y/N | NA |
Kagayakimaru Series For Nonferrous Metal High-Speed Finishing TZ
| Finish category | Finishing | Shank diameter (d)(mm) | 22 | Dimension D1(mm) | 40 |
|---|---|---|---|---|---|
| Dimension b(mm) | 10.4 | Dimension F(mm) | 50 | Cutting edge angle A.R(°) | -21 |
| Coolant | 0 | Z-axis adjustable range(mm) | 1.0 |
Kagayakimaru Series TA-EDCT
| work material | general steel / high hardness steel / Stainless Steel / Cast Iron / Titanium |
|---|
Kagayakimaru Series, Aluminum Alloy Body TF
| Cutting edge angle A.R(°) | -21 | Z-axis adjustable range(mm) | 1.0 | Y-axis adjustable range(mm) | 0.3 |
|---|
Kagayakimaru Series, Aluminum Cutting Tip For TF, EDCT
| Shape (initial letter of model number) | E (75°Diamond Shape) | Clearance angle | D(15°) | work material | Non-ferrous metal |
|---|---|---|---|---|---|
| Dimension S(mm) | 4.5 | Dimension hm(mm) | 0.05 | Insert material | TN6501 (carbide PVD, TiB 2-coating) |
Kame Cutter
| Application | Chamfering/Horizontal | Tip angle (?) | 45 | Maximum Blade Diameter (D)(mm) | 34.9 |
|---|---|---|---|---|---|
| work material | general steel / Stainless Steel / Cast Iron / Aluminum / Resin | Single blade, two blades | Single blade | Peripheral Blade Y/N | NA |
| Coating Y/N | NA | Coating Type | Non-Coated | Number of flutes | 5 |
| ?D1(mm) | 36.4 | Minimum Machining Diameter Ds(mm) | 24 | ?dn(mm) | 36 |
| ?d(mm) | 25 | Overall Length L(mm) | 105 | ?s(mm) | 85 |
| ?n(mm) | 20 | S(mm) | 1.2 |
Key Groove Skip Accessory NS3100
| Tap Type | Hand Tap | Product Content | Key Groove Skip Accessory |
|---|
Key Sheet Cutter
| Tool Material Type | High-speed steel (SKH51) | Machining Application | Keyway | Torsion Angle (?)(°) | No torsion |
|---|---|---|---|---|---|
| Coating | Non-Coated |