Back to products
Режущие инструменты
Drills for Woodworking, 5 Piece Set
| Package size(mm) | H175?W90?D20mm | Weight(g) | 118 | Set Content(mm) | 4/5/6/8/10 |
|---|---|---|---|---|---|
| Number Contained In A Packet | 5 pcs./set |
Dry Bit (Kanta-Kun II), Body Only
| Product Type | Other | Nominal Diameter Type | Meter | Shank Type | 13 mm & SDS Shank |
|---|
Dry Bit (Kanta-Kun II), Finished Product
| Product Type | Other | Nominal Diameter Type | Meter | Shank Type | 13 mm & SDS Shank |
|---|
Dry Processing Roll Tap OL+RZ/OL-RZ
| Chamfer threads | 4P | Tool Material Type | Powder high-speed steel | work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless steel (SUS) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) |
|---|---|---|---|---|---|
| Tap Type | Roll tap | Hole type | For through hole | Coating Y/N | Available |
| Coating Type | TiCN | Number of protrusions | 4 |
Dry Type Bit Light for Dymo Drill Dry Arrow
| Product Type | Other | Nominal Diameter Type | Meter | Mounting Screw | M27 |
|---|---|---|---|---|---|
| Long Wrench | 4-Surface | Effective Length(mm) | 247 |
DSBN Type (Outer Diameter Machining)
| Applicable Tip Shape | S (Rectangular) | Application | Outer Diameter | Clamp Shape | Cable clamp |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | F2(mm) | 13 | L2(mm) | 34 |
| Clamp | CP-3D | Screw | CS-3D | Spring | SP-3D |
| Sheet | DS-44 | Sheet screw | SB-4085TR | Wrench | LW-3/FT-15 |
| Standard corner R (r?) | 0.8 |
DSF Surface End Mill For Copper Electrode/Aluminum/Plastic
| work material | Aluminum / Copper | Number of flutes(sheet) | 1 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Plane | Blade tip shape | Sharp Edge |
DTGN Type (Outer Diameter Machining)
| Applicable Tip Shape | T (Triangle) | Application | Outer Diameter | Clamp Shape | Cable clamp |
|---|---|---|---|---|---|
| Applicable Tip Clearance Angle Type | Negative | F2(mm) | 20 | L2(mm) | 25 |
| Clamp | CP-2D | Screw | CS-2D | Spring | SP-2D |
| Sheet | DT-32 | Sheet screw | SB-3080TR | Wrench | LW-2.5/FT-10 |
| Standard corner R (r?) | 0.8 |
Dual Hole Cutter
| Product Type | Hole saw | Blade thickness(mm) | 3.0 | Overall Length(mm) | 161 |
|---|---|---|---|---|---|
| Blade Length(mm) | 65 | Protrusion amount(mm) | 25 | center drill | DH8125 |
| shank No. | DH-SK/DH-SKD/DH-SKL/DH-SKDL |