Back to products
Режущие инструменты
Cutting Type for Miniature Screws MS+TR/MS-TR
Screw Types | Miniature | Chamfer threads | 3P | Tool Material Type | High-speed steel |
---|---|---|---|---|---|
Tap Type | Point tap | Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 36 | Shank diameter (Ds)(mm) | 3 | Shank square width (K)(mm) | 2.5 |
Shank square part length(mm) | 5 | Number of Grooves | 3 | Shape | a |
Cylindrical Die for Gas Pipes
Work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Zinc Alloy Casting (ZDC) | Tap Type | Die | Material Details | SKS |
---|
D Series Dry Type Diamond
Application | Blocks/Bricks/Mortar/ Soft Siding Board/Hard Siding Board/Rebar Reinforced Concrete/Resin Based Artificial Marble/Porcelain Tile/Stone |
---|
DA Ball End Mill, 2 Flutes DAB
Type | Ball | work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | Non-Coated | Blade diameter tolerance | -0.02 to 0 | Torsion angle(°) | 30 |
R tolerance | ±0.01 |
DA Long Ball End Mill DABL
Type | Long-Neck Ball | work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | Non-Coated | Blade diameter tolerance | -0.02 to 0 | Torsion angle(°) | 30 |
R tolerance | ±0.01 |
DA Square End Mill 2 Flute DA12
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Type | Square | Coating | Non-Coated |
---|---|---|---|---|---|
Torsion Angle (?) | Standard torsion (30-40°) |
DA Square End Mill 4 Flute DA14
work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 4 | Type | Square |
---|---|---|---|---|---|
Coating | Non-Coated | Torsion Angle (?) | Standard torsion (30-40°) | Blade diameter tolerance | -0.03 to 0 |
DA Tapered Ball End Mill, 2 Flute, DATB
Type | Taper ball | Number of flutes(sheet) | 2 | Coating | Non-Coated |
---|---|---|---|---|---|
Blade diameter tolerance | -0.02 to 0 | Torsion angle(°) | 30 | R tolerance | ±0.01 |
DCES DIA Coated, for Graphite Processing, 2-Flute Square
work material | Aluminum / Copper / Graphite / Resin | Number of flutes(sheet) | 4 | Type | Square |
---|---|---|---|---|---|
Coating | Dia Coat | Machining Application | Plane / Side / Groove / Inclined Cuts | Blade tip shape | Sharp Edge |
Torsion Angle (?) | Standard torsion (30-40°) |
DCES DIA Coated, for Graphite Processing, 4-Flute Square
work material | Aluminum / Copper / Graphite / Resin | Number of flutes(sheet) | 4 | Type | Square |
---|---|---|---|---|---|
Coating | Dia Coat | Machining Application | Plane / Side / Groove / Inclined Cuts | Blade tip shape | Sharp Edge |
Torsion Angle (?) | Standard torsion (30-40°) |
DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
Type | Long-Neck Ball | work material | Aluminum / Copper / Graphite / Resin | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Coating | Dia Coat | R Precision(?m) | -0.01~0.01 | Machining Application | Curved surface / Side / Engraving / R Groove |
DCLN Type (Outer Diameter Machining / End Machining)
Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face | Clamp Shape | Cable clamp |
---|---|---|---|---|---|
Applicable Tip Clearance Angle Type | Negative | F2(mm) | 20 | Clamp | CP-3D |
Screw | CS-3D | Spring | SP-3D | Sheet | DC-44 |
Sheet screw | SB-4085TR | Wrench | LW-3/FT-15 | Standard corner R (r?) | 0.8 |