Закрыть
2-Flute Corner R Short FX-CR-EDS-6
| R Size(mm) | 0.1 | work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Type | Radius | Overall Length (L)(mm) | 50 | Shank diameter (d)(mm) | 6 |
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute Corner R Short FX-CR-MG-EDS
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute Corner R Short GX-CR-EDS-SF
| work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper | Number of flutes(sheet) | 2 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | For General Steels (AlCrN, etc.) | Torsion Angle (?) | No torsion |
Закрыть
2-Flute, 4-Blade Pencil Neck / Long Neck Corner R DG-CPR
| work material | Graphite | Type | Long-Neck Radius | Coating | Non-Coated |
|---|---|---|---|---|---|
| Torsion Angle (?) | Standard torsion (30-40°) | Neck Section Taper Half Angle(°) | 0 |
Закрыть
2-Flute, Corner R Long, FX-CR-MG-EDL
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute, Die Plunging Process, GX-PDS-SF
| R Size(mm) | 0.2 | work material | General steel / Quenched and tempered steel / Cast Iron / Aluminum / Copper / Graphite | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Type | Radius | Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | For General Steels (AlCrN, etc.) |
| Torsion Angle (?) | No torsion |
Закрыть
3-Flute Short End Mill With Oil Hole For Aluminum Alloys AERO-O-ETS
| work material | Aluminum | Number of flutes(sheet) | 3 | Type | Radius |
|---|---|---|---|---|---|
| Overall Length (L)(mm) | 100 | Underneck length (?1)(mm) | 55 | Coating | DLC |
| Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
| work material | Aluminum / Copper / Resin | Number of flutes(sheet) | 3 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | Non-Coated | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
3-Flute, for Aluminum Alloy, CA-MFE-SF
| R Size(mm) | 1 | work material | Aluminum / Copper | Number of flutes(sheet) | 3 |
|---|---|---|---|---|---|
| Type | Radius | Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | Non-Coated |
| Torsion Angle (?) | No torsion |
Закрыть
4-Blade Radius End Mill GSV MILL 4000-R-2.5D Type
| Work material | General steel, carbon steel, alloy steel / Prehardened Steel, Quenched And Tampered Steel, Die Steel / High hardness steel HRC45–55 / High hardness steel HRC55–60 / Stainless Steel / Cast Iron / Ti alloy, heat-resistant alloy | Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | GSX/GS |
|---|---|---|---|---|---|
| Torsion Angle (?) | Standard torsion (30-40°) | R Precision(?m) | ± 0.02 |
Закрыть
4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Titanium | Number of flutes(sheet) | 4 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
4-Flute Corner R, Long, FX-CR-MG-EML
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 4 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |