Back to products
Вставки (для фрезерования)
90° Shoulder Mill M690 Series Insert SDMT-ML?10 Pieces Per Package?
| Shape (initial letter of model number) | S (Square) | Clearance angle | D(15°) | Available corners | 4 |
|---|---|---|---|---|---|
| Nose R(°) | 1.2 |
90° Shoulder Mill M690 Series Insert SDMX-MH?10 Pieces Per Package?
| Shape (initial letter of model number) | S (Square) | Clearance angle | D(15°) | Available corners | 4 |
|---|
90° Shoulder Mill M690 Series Insert SDMX-MM?10 Pieces Per Package?
| Shape (initial letter of model number) | S (Square) | Clearance angle | D(15°) | Available corners | 4 |
|---|
Aero Chipper ALX Model Compatible Tip
| Shape (initial letter of model number) | Other | Clearance angle | Other | work material | Steel / High Hardness Material |
|---|---|---|---|---|---|
| Available corners | 2 | Dimensions/T(mm) | 5 | Dimensions/B(mm) | 16 |
| Material type | FZ05 | Accuracy | G |
AXMT-PEER-E For SEC-Wave Mill
| Shape (initial letter of model number) | A (85° parallelogram) | Clearance angle | P(11°) | Material type | Coating |
|---|
Backdraft DBD Type Compatible Chips
| Shape (initial letter of model number) | C (80° Diamond-Shape) | Clearance angle | P(11°) | Available corners | 2 |
|---|---|---|---|---|---|
| Side length(mm) | 16.669 | Thickness(mm) | 4.762 | Width(mm) | 9.525 |
| Nose R(mm) | R0.8 | Hole Diameter(mm) | ?4.6 |
Blade Tip Replacement Type Finish One Modular Head MF0 Type Supported Tip
| Shape (initial letter of model number) | Other | Clearance angle | D(15°) | work material | Steel / Cast Iron |
|---|---|---|---|---|---|
| Dimensions/A(mm) | 12.7 | Dimensions/T(mm) | 3.18 | Dimensions/B(mm) | 9.525 |
| Material type | JC8003 | Dimensions/?D(mm) | 4.4 | Corner | 2-R0.8 |
| Supported holders | MFO-170-M8/MFO-210-M10 | Accuracy | G |
Blend-Type Insert For Aluminum Parts Machining Cutter SFC
| Shape (initial letter of model number) | Other |
|---|
CBN Wiper Insert APCW
| Shape (initial letter of model number) | A (85° parallelogram) | Clearance angle | P(11°) |
|---|
Ceramic Wiper Insert For JFDX Series Cutter For Machining Cast Iron Parts And Heat-Resistant Alloy Parts
| Shape (initial letter of model number) | S (Square) | Clearance angle | N(0°) | work material | Cast Iron |
|---|