Back to products
Oil Free Bushings
Daislide Thrust Washer TA Series
| Material | Metal | Environment | Standard / Heat Resistant / Foreign object Resistance |
|---|
Divided Medal for Flocculator (47H)
| Type | Flange | Operating Environment | In Oil / In Water / In Chemical | The kind of shape | Divided metal |
|---|
Flanged Oil Free Bushing / Multi-Layer Type
| Type | Flanged Type | Multi-Layer | Steel / bronze sintered / tetrafluoroethylene | Environment | Standard / In Oil |
|---|---|---|---|---|---|
| Maximum Allowable PV Value Range(N/mm2•m/s) | 2.1~5.0 | Maximum Allowable PV Value(N/mm2•m/s) | 3.6 | Max. Allowable Velocity V(m/s) | 0.65 |
| Length Type | Single | Mounting Shaft Fits | h7 | Lubrication Condition | Non-Lubricated |
iglidur® G-flange bearing (Form F)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.42 | Max. Allowable Surface Pressure P(N/mm2) | 80 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® G-Sleeve bearing (Form S)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.42 | Max. Allowable Surface Pressure P(N/mm2) | 80 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® J-flange bearing (Form F)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.34 | Max. Allowable Surface Pressure P(N/mm2) | 35 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® J-Sleeve bearing (Form S)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.34 | Max. Allowable Surface Pressure P(N/mm2) | 35 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® M250-Sleeve bearing (Form S)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.12 | Max. Allowable Surface Pressure P(N/mm2) | 20 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® M250, sleeve bearing with flange
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.12 | Max. Allowable Surface Pressure P(N/mm2) | 20 |
|---|---|---|---|---|---|
| Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
iglidur® P-flange bearing (Form F)
| Resin Group | High Performance Polymer Group | Maximum Allowable PV Value(N/mm2•m/s) | 0.39 | Max. Allowable Surface Pressure P(N/mm2) | 50 |
|---|---|---|---|---|---|
| Lubrication Condition | Unlubricated |