Back to products
V-образные канавки
Diamond-Shaped Tape Cutter
| Height(mm) | 20 | Type(mm) | Chamfering Mold (0.6) | Width(mm) | 15.5 |
|---|---|---|---|---|---|
| Length(mm) | 60 | JAN Code | 4962660495151 | Trusco Code | 404-2875 |
Double Sided Chamfering Cutter 45° DFC
| Application | Hole Chamfer / V Groove | work material | general steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum | Compatible insert(mm) | MT-SDM050204AM VM25, MT-SDH050204US MK10 |
|---|
For Mentatsu Aluminum (Long Shank) AL-VME-LS
| Application | Chamfering/Horizontal | Tip angle (?) | 90 | work material | Aluminum |
|---|---|---|---|---|---|
| Single blade, two blades | Single blade | Tool Material Type | Carbide | Coating Y/N | NA |
| Coating Type | Non-Coated |
For Mentatsu Aluminum AL-VME
| Application | Chamfering/Horizontal | Tip angle (?) | 90 | work material | Aluminum |
|---|---|---|---|---|---|
| Single blade, two blades | Single blade | Tool Material Type | Carbide | Coating Y/N | NA |
| Coating Type | Non-Coated |
GCCC for Carbide Center Chamfering
| work material | Carbon steel, alloy steel and tool steel / Quenched and tempered steel (30 to 60 HRC) / Stainless Steel / Cast Iron / Aluminum | Peripheral Blade Y/N | Available | Tool Material Type | Carbide |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated |
Hex Shaft Chamfering Cutter
| Application | Hole Chamfer / Chamfering/Horizontal | work material | Aluminum / Copper | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Coating Y/N | NA | Coating Type | Non-Coated | Shaft Diameter(mm) | 6.35 |
High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Resin | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | NA | Tool Material Type | Powder high-speed steel | Coating Y/N | Available |
| Coating Type | TiCN |
High-Speed Steel Chamfering End Mill, 2-Flute / Short
| Use | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Single Blade / Double Blade | Single Blade | Peripheral Blade Availability | Included |
|---|---|---|---|---|---|
| Tool Material Type | Cobalt High-Speed Steel |
Hole Chamfering Leading Drill V Coating Powder HSS Long Shank
| Application | Centering (Positioning) / Hole Chamfer | Tip angle (?) | 90 | work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper |
|---|---|---|---|---|---|
| Single blade, two blades | Single blade | Peripheral Blade Y/N | Available | Tool Material Type | Powder high-speed steel |
| Coating Y/N | Available | Coating Type | TiCN |
Leading Drills, FX-LDS
| Application | Centering (Positioning) / Hole Chamfer | Tip angle (?) | 90 | work material | General steel / Quenched and tempered steel / High hardness steel / Cast Iron / Aluminum / Titanium / Copper |
|---|---|---|---|---|---|
| Single blade, two blades | Single blade | Peripheral Blade Y/N | NA | Tool Material Type | Carbide |
| Coating Y/N | Available | Coating Type | TiAlN |
Leading Drills, NC-LDS
| Application | Centering (Positioning) / Hole Chamfer | work material | General steel / Cast Iron / Aluminum / Copper | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | NA | Tool Material Type | High-speed steel | Coating Y/N | NA |
| Coating Type | Non-Coated |