Закрыть
«Two by Masu» 2X4 Lumber Hole Saw Set
| Product Type | Hole saw |
|---|
Закрыть
1/10″ Taper Spiral Taper Reamer for Finishing SPTR-F
| Shank Type | Taper shank | work material | general steel / Cast Iron / Aluminum / Copper / Alloy Steel | Coating Y/N | NA |
|---|---|---|---|---|---|
| Groove Shape | Spiral | Base Blade Y/N | NA | Both square | 1/10 |
| blade shape | Right blade left torsion | Torsional Angle | 12° | Diameter tolerance(mm) | -0.05~+0.05 |
Закрыть
1/10″ Taper Spiral Taper Reamer for Rough Finishing SPTR-RF
| Shank Type | Taper shank | work material | general steel / Aluminum / Copper / Alloy Steel | Coating Y/N | NA |
|---|---|---|---|---|---|
| Groove Shape | Spiral | Base Blade Y/N | NA | Both square | 1/10 |
| blade shape | Right blade left torsion | Torsional Angle | 12° | Diameter tolerance(mm) | -0.05~+0.05 |
Закрыть
2 Corner Tip Bar HPB Type (Inner Diameter Machining)
| Minimum Machining Diameter ?A | 6 | Application | Internal Diameter | Cutting Direction | Right-hand |
|---|---|---|---|---|---|
| Full length L1 | 70 | Shank diameter ?D | 6 | H(mm) | 5.2 |
| F(mm) | 5.5 | r?(mm) | 0.05+0/-0.02 | Material | KW10 |
Закрыть
2-Flute 3D Type WXL-3D-DE
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | For General Steels (AlCrN, etc.) | Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute 4D Type WXL-4D-DE
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | For General Steels (AlCrN, etc.) | Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Blade tip shape | With Lead |
| Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute Corner R Short CR-XPM-EDS
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Tool Material Type | Powder high-speed steel |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | Non-Coated | Tolerance | 0~-0.03 |
Закрыть
2-Flute Corner R Short FX-CR-EDS-6
| R Size(mm) | 0.1 | work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Type | Radius | Overall Length (L)(mm) | 50 | Shank diameter (d)(mm) | 6 |
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute Corner R Short FX-CR-MG-EDS
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Number of flutes(sheet) | 2 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | TiAlN | Torsion Angle (?) | Standard torsion (30-40°) |
Закрыть
2-Flute Corner R Short GX-CR-EDS-SF
| work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper | Number of flutes(sheet) | 2 | Type | Radius |
|---|---|---|---|---|---|
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Coating | For General Steels (AlCrN, etc.) | Torsion Angle (?) | No torsion |
Закрыть
2-Flute Corner, Rounding Shape, FX-ECR
| Application | Round Chamfer | work material | General steel / Quenched and tempered steel / High hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | NA | Tool Material Type | Carbide | Coating Y/N | Available |
| Coating Type | TiAlN |
Закрыть
2-Flute for Straight Blade MG-STDN
| work material | General steel / Cast Iron / Aluminum / Copper | Number of flutes(sheet) | 2 | Type | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Blade tip shape | With Lead |
| Torsion Angle (?) | No torsion |